Explosion proof camera installation and use guide
Explosion-proof cameras are a special type of surveillance equipment that is widely used for safety monitoring in hazardous environments. Explosion-proof cameras belong to explosion-proof monitoring products, is the explosion-proof industry with the monitoring industry cross-products, because in the high-risk flammability, explosion-proof site can not use conventional camera products, the need for explosion-proof function of the explosion-proof cameras.In order to ensure the safety and effectiveness of the equipment, proper installation and use is crucial. This article will provide you with a guide to the installation and use of explosion-proof cameras.
1. Preparation before installation
Before installing the explosion-proof camera, you need to make some preparations:
Understand the installation environment: Understand the hazard class and explosion-proof requirements of the installation location to determine the appropriate explosion-proof camera models and specifications.
Choose a suitable location: Choose a location that can fully monitor the target area, and ensure that the camera will not be covered by other equipment or buildings.
Check the power supply: Make sure that there is a stable and reliable power supply near the installation location and check whether the power supply voltage meets the requirements of the camera.
2.Installation steps
Step 1: Fixing the mounting bracket
Use a suitable tool to fix the mounting bracket to the mounting position.
Ensure that the mounting bracket is firm and stable and can support the weight of the camera.
Step 2: Connect the power supply and network
Connect the camera's power cord to the power supply, and make sure the power cord is firmly connected.
If a network connection is required, connect the network cable to the camera's network interface.
Step 3: Adjust the camera angle
Adjust the angle and direction of the camera according to the actual needs to ensure that the target area can be fully monitored.
Use the adjustment tool to fix the angle of the camera to prevent the angle from changing due to external force.
Step 4: Testing and Commissioning
Turn on the power of the surveillance device to ensure that the device can start normally.
Use the monitoring software or the debugging tool that comes with the device to check whether the camera can work normally and whether the image is clear and stable.
3. Precautions for use
Regular Inspection: Check the working status of the camera regularly to ensure the normal operation of the equipment.
Keep clean: Clean the lens and housing of the camera regularly to prevent dust and dirt from affecting image quality.
Prevent exposure to harsh environments: avoid exposing the camera to strong sunlight, high temperature, humidity or corrosive gases and other harsh environments, so as not to affect the life of the equipment.
Secure the equipment: When the equipment is installed in a location that is vulnerable to damage or vandalism, appropriate protective measures should be taken to prevent the equipment from being damaged or stolen.
In addition to the above points, the specific installation should pay attention to the following operations:
1.Explosion-proof camera inlet, must be sealed with a rubber sealing ring, prohibit the use of filling sealing mud, asbestos rope and other methods instead; prohibit the filling of any substance in the cavity. Loss of explosion-proof performance; rubber seals on the oil should be scrubbed clean to avoid aging and deterioration.
2.It is strictly prohibited to casually change the structure of the explosion-proof camera, parts and equipment, the internal line. Fastening bolts shall not be arbitrarily switched or missing, and its excess inlet and outlet of the elastic gasket and metal gasket must maintain the factory sealing status, and the compression nut should be tightened to make the inlet seal.
3.Wiring is best to take the dark line, there is no way to take the open line, then we must ensure that the line part of the physical protection to do the best.
4.The installation should pay attention to avoid strong impact explosion-proof infrared camera, before installation, must confirm whether the power supply voltage is the specified voltage, so as not to burn out, the lens should not be directed at the bright light, such as sunlight, lighting, etc., otherwise it is easy to over-brighten the phenomenon of ccd's service life will also have a certain impact, explosion-proof infrared camera installation location should also be avoided humidity, dusty, very hot, very cold, strong electromagnetic radiation. Place.
5.Daily operation and maintenance checks, should try to avoid opening the explosion-proof camera shell, must be opened should first cut off the power supply. If the explosion-proof shell is opened, the explosion-proof surface should be properly protected from damage, the explosion-proof surface should be placed upward during maintenance, not in direct contact with the ground, the surface of the field should be coated with phosphate paste or 204 anti-rust oil after cleaning.
6.Explosion-proof infrared camera is relying on the CCD supporting infrared lamps emitting infrared light on the object reflected to the CCD camera lens imaging. Therefore, we should be installed in the explosion-proof infrared camera should be avoided in the field of view of all black objects, open space, water and other objects that absorb infrared light, if the infrared light is absorbed or weakened, the effective irradiation of infrared lamps will make a big difference, thus affecting the explosion-proof infrared camera to monitor the picture effect.
Nowadays, explosion-proof surveillance cameras have become irreplaceable security equipment in special industrial production environments, such as chemical plants, gas stations, ports and terminals, coal mines, offshore drilling platforms and so on.On the objective environment for the depth of security needs have clear requirements, in short, explosion-proof cameras are absolutely every need explosion-proof monitoring of the region are indispensable equipment. Our Zoan can help you with your product needs.